Benable — create shareable lists of things you recommend!
E.g., products you love, local businesses, travel recs - you can add anything to a Benable list!

I Finally Found DIY Kitchen Drawer Dividers That Fit My Drawers Perfectly

Purple Star emoji 15 items
Everything to build DIY kitchen drawer dividers that fit your drawers — plain boards and bamboo inserts, measuring and cutting tools, sanding and finishing basics, and the small fittings that keep a layout from sliding, from our guide How to Make DIY...
Sections
4
 
 
 
 

Boards & Inserts

The boards and inserts that become the dividers themselves — bamboo sets for a quick fit, plain boards to cut to your drawer's exact size, and spring-loaded dividers that adjust without a saw.

 
Little Adored profile picture
These two bamboo dividers expand from about 17.5 to 22.8 inches, so they can stretch across most standard kitchen drawers without any cutting. The bamboo is sturdy and easy to wipe clean, and the pair makes a simple starting point before adding small...
Better Homes & Gardens Bamboo Expandable Drawer Dividers, 2pc
 
Little Adored profile picture
Five bamboo trays in different sizes that nest together to fill a drawer, so utensils, gadgets, and odds and ends each get their own spot. Bamboo wipes clean easily, and the set works well either on its own or alongside cut-to-size boards for a custo...
Better Homes & Gardens Bamboo Drawer Organizer Set, 5pc
 
Little Adored profile picture
A smooth 1/2-inch birch panel, 2 by 4 feet, that cuts cleanly into divider strips sized to your drawer's exact depth. Birch takes sanding and a food-safe finish well, so the cut edges end up smooth enough for everyday use.
ProWood 1/2 in. x 2 ft. x 4 ft. Birch Plywood Project Panel 154153
 
Little Adored profile picture
These expandable dividers press-fit between drawer walls, with foam ends that grip without screws or glue. They are handy as a no-cut option, or to hold a layout in place while custom boards are being fitted.
mDesign Expandable Adjustable Dresser Drawer Divider

Measure & Mark

Measure twice so you only cut once — a tape, a square, and a straightedge are what turn a board into dividers that actually fit your drawer.

 
Little Adored profile picture
A 25-foot tape with a wide, easy-to-read blade is all it takes to measure a drawer's width and depth accurately. The belt clip and rubber grip make it easy to keep on hand while marking boards.
Husky 25 ft. Tape Measure 90649
 
Little Adored profile picture
A 12-inch combination square marks straight, square lines across a board and checks that cut edges are true. The sliding head also works as a depth gauge when sizing dividers to the drawer's height.
Empire 12 in. Combination Square E250
 
Little Adored profile picture
A flat carpenter pencil marks clearly on raw wood and will not roll off the bench mid-project. The mechanical style keeps a sharp point without sharpening, so cut lines stay crisp and easy to follow.
Husky Mechanical Carpenter Pencil 14000
 
Little Adored profile picture
A 36-inch aluminum straightedge spans a whole drawer side, so long cut lines stay true from end to end. It also doubles as a guide for the saw, keeping the blade right on the mark.
Empire 36 in. Aluminum Straight Edge Ruler 403

Cut & Finish

Cut the boards to length, then sand the edges smooth and glue the joints so the dividers stay put. A few clamps hold everything square while the glue sets.

 
Little Adored profile picture
A 15-inch hand saw with triple-ground teeth cuts plywood and pine cleanly without power tools. The ergonomic handle keeps the cut steady along a marked line.
Stanley Trade cut 15 in. Tooth Saw STHT20348
 
Little Adored profile picture
Three sheets in coarse, medium, and fine grits take cut edges from rough to smooth in stages. Start coarse to knock down saw marks, then finish with fine for a splinter-free edge.
Emery Cloth Sandpaper 3.66 in. x 9 in. Coarse, Medium and Fine Assorted
 
Little Adored profile picture
A PVA wood glue that dries to a natural color and sands smooth, so joints look clean after finishing. It sets in 5 to 10 minutes and clamps in 20 to 30, which is plenty for small divider joints.
Gorilla 4 fl. oz. Wood Glue 62020
 
Little Adored profile picture
Small 3-inch spring clamps hold glued joints tight while the glue sets, and their padded jaws protect the wood. A few of them make it easy to keep dividers square until the bond is firm.
Husky 3 in. Metal Spring Clamp 99539

Keep It Sorted

Once the dividers are in, keep each section working — liner to stop sliding, small bins for the odds and ends, and labels so everything has a name.

 
Little Adored profile picture
A solid, non-slip liner keeps dividers and trays from sliding when the drawer opens and closes. The 18-by-100-inch roll cuts to fit, and the textured surface wipes clean.
Husky 18 in. x 100 in. Black Premium Solid Drawer Liner DTC130001
 
Little Adored profile picture
Two small bins with low fronts catch the bits that never fit a divider slot — batteries, twist ties, bag clips. They lift out easily, so the drawer stays sorted without a full re-do.
Mainstays Small Easy Access Storage Bins 2-Pack White
 
Little Adored profile picture
A compact label maker prints clear, laminated labels for each drawer section, so everyone puts things back in the right spot. It comes with a starter tape, and the keyboard makes typing a label quick.
Brother P-Touch PT-D200G Label Maker with Tape, Easy-to-Use Home & Office Labeling Solution, 1 Piece